Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Introduction to the Gigabit Ethernet 4-Port ServerNet
Adapter (G4SA)
Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide528166-006
1-4
G4SA External Connectors, Indicators, and Cables
RJ-45 Copper Port D
10/100/1000 BaseT
Link Status (Top
LED)
On
Off
Ethernet link is connected
Ethernet link is not connected or adapter is
operating in fiber mode
Link Activity
(Bottom LED)
On
Off
Flashing
Ethernet link is connected and idle
Ethernet link is not connected or adapter is
operating in fiber mode
Burst of data detected on the port; flash rate is 12
flashes per second (FPS)
SFP Fiber Port C
1000 Base-SX
Link Status (Top
LED)
On
Off
Ethernet link is connected
Ethernet link is not connected or adapter is
operating in copper mode
Link Activity
(Bottom LED)
On
Off
Flashing
Ethernet link is connected and idle
Ethernet link is not connected or adapter is
operating in copper mode
Burst of data detected on the port; flash rate is 12
flashes per second (FPS)
SFP Fiber Port D
1000 Base-SX
Link Status (Top
LED)
On
Off
Ethernet link is connected
Ethernet link is not connected or adapter is
operating in copper mode
Link Activity
(Bottom LED)
On
Off
Flashing
Ethernet link is connected and idle
Ethernet link is not connected or adapter is
operating in copper mode
Burst of data detected on the port; flash rate is 12
flashes per second (FPS)
Table 1-1. G4SA Ethernet Port Status LED Indicators (page 2 of 2)
Port LED State Description (page 2 of 2)