Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Installing a G4SA

Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide—528166-006

2-8

Install the G4SA

7. Connect the adapter connectors to the Ethernet ports on the G4SA:

a. For the copper interfaces, connect the RJ-45 connectors to the Ethernet ports

on the G4SA. If you are using the fiber interfaces, connect the LC connectors

to the Ethernet ports on the G4SA.

b. Connect the other end of the cables to your Ethernet hub or switch. Read the

labels on the cables to make sure you connect the cables to the proper ports

and Ethernet hub or switch.

VST997.vsd

Gigabit Ethernet 4-Port ServerNet Adapter (G4SA)

RJ-45 Connector (10/100/1000 Mbps)

LC Connector (Fiber)

RJ-45 Connector (10/100/1000 Mbps)

RJ-45 Connector (10/100 Mbps)

PIF D

PIF C

PIF D PIF C

PIF B PIF A

Power-on LED (green)

Fault LED (amber)

Only four of the G4SA's six ports can be in use at any one time

To Ethernet

Port A or B on

the SWAN 2

Concentrator

10/100/1000 BaseT

Ethernet Hub

Ejector Latch

G4SA