Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Replacing a G4SA
Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide—528166-006
3-5
Identify Any Communications Lines and ServerNet
Wide Area Network (SWAN) Using the G4SA
6. Use the SCF INFO PROCESS command for each IPXPROTO process you
identified in Step 5 to determine the IPXPROTO process associated with the LIFs
on the G4SA to be replaced. Write down the associated LIFs and IPXPROTO
processes on your worksheet.
INFO PROCESS $process-name
In Example 3-7, which is a partial output, the LIF named L112J is associated with
the IPXPROTO process named $ZNV0.
7. Use the SCF LISTDEV command to display the single-line Expand-over-IP lines to
identify the names of Expand-over-IP lines configured on the system.
LISTDEV TYPE 63,2
In Example 3-8 on page 3-6, two Expand-over-IP lines (named $IPC03 and
$IPC02) are configured as part of a multiline path.
Example 3-6. SCF NAMES SUBSYS Command
->NAMES SUBSYS $ZMGR
IPXSPX Names SUBSYS \MYSYS.$ZMGR
SUBSYS
$ZMGR
PROCESS
$ZNV0
SERVER
$ZNV0.#SAP
PROCESS
$ZNV1
SERVER
$ZNV1.#SAP
Example 3-7. SCF INFO PROCESS Command
->INFO PROCESS $ZNV0
IPXSPX Info PROCESS
Process Name Primary CPU Backup CPU *I/O Port Name I/O Port Type
$ZNV0 2 3 L112J IPXETH 802.3