Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Replacing a G4SA
Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide—528166-006
3-7
Identify Any Communications Lines and ServerNet
Wide Area Network (SWAN) Using the G4SA
10. Use the SCF INFO ADAPTER command for each SWAN concentrator you
identified in Step 9 to determine if any of the SWAN concentrators configured on
the system are connected to the G4SA to be replaced. Write down the name of the
SWAN concentrator that is connected to the G4SA on your worksheet.
INFO ADAPTER $ZZWAN.#adapter-name
11. If a SWAN concentrator is connected to the G4SA to be replaced, determine the
names of the WAN subsystem IOPs configured to use that SWAN concentrator by
using the SCF INFO DEVICE command. Write down the WAN subsystem IOPs
that use the concentrator on your worksheet.
INFO DEVICE $ZZWAN.#*
In Example 3-12, the SWAN concentrator named S01 is used by the IOP named
#A10.
Example 3-10. SCF NAMES ADAPTER Command
->NAMES ADAPTER $ZZWAN.#*
WanMgr Names ADAPTER $ZZWAN.#*
ADAPTER
$ZZWAN.#S01
$ZZWAN.#S02
Example 3-11. SCF INFO ADAPTER Command
->INFO ADAPTER $ZZWAN.#S01
WAN MANAGER Detailed Info Adapter \MYSYS.$ZZWAN.#S01
*TrackId.......... ZWXFF *TCPIP Name...... $ZB019
*ALTTCPIP Name.... $ZB01D Concentrator Type. SYNC
KERNELCODE........ $SYSTEM.CSS00.C7953P00
*SNMPCODE......... $SYSTEM.CSS00.C7849P00
*HOSTIP Address... 172.16.35.16
*ALTHOSTIP Address 172.16.45.16
SUBNETMASK........ %HFFFFFF00
ALTSUBNETMASK..... %HFFFFFF00
Example 3-12. SCF INFO DEVICE Command
->INFO DEVICE $ZZWAN.#*
WAN MANAGER Detailed Info Device \MYSYS.$ZZWAN.#A10
*Adapter Name..... S01 *Clip........... 1
*Line............. 0 *Path........... A
Profile........... MLHSWAN *Recsize........ 12
Preferred Cpu..... 2 Alternate Cpu... 3
*Type............. (63,06)
*MULTINAME........ $PMAU1
*IOPOBJECT........ \TAHITI.$SYSTEM.SYS00.LHOBJ