Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Replacing a G4SA
Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide—528166-006
3-11
To Stop a Port Access Method (PAM) Line
To Stop an IPXPROTO Process
1. Stop the IPXPROTO process.
•
For a IPXPROTO process configured as a generic process, use the Kernel
subsystem SCF ABORT PROCESS command:
ABORT PROCESS $ZZKRN.#gpname
•
For a IPXPROTO process not configured as a generic process, use the SLSA
subsystem SCF STOP PROCESS command:
STOP PROCESS $process-name
2. Use the SCF STATUS PROCESS command to verify that the IPXPROTO process
is in the STOPPED state (see Example 3-20).
STATUS PROCESS $process-name
To Stop a Port Access Method (PAM) Line
1. Use the SCF STOP command with the SUB ALL option to stop the PAM line.
STOP LINE $line-name, SUB ALL
The SUB ALL option aborts the LINE object and all subordinate objects.
Example 3-19. SCF STATUS DEVICE Command
->STATUS DEVICE $ZZWAN.#LINE1
WAN Manager STATUS DEVICE for DEVICE \COWBOY.$ZZWAN.#LINE1
State :........ STOPPED
LDEV number.... 110
PPIN........... 2 ,13 BPIN......... 3 ,14
Example 3-20. SCF STATUS PROCESS Command
->STATUS PROCESS $ZNV2
IPXSPX Status PROCESS
Process Name State Diagnostic State Trace
$ZNV2 STOPPED NORMAL OFF