Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Replacing a G4SA

Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide—528166-006

3-14

Abort the G4SA

1. Use the SCF ABORT LIF command for each LIF to stop access to the LIFs

associated with the G4SA to be replaced.

ABORT LIF $ZZLAN.lif-name

2. Use the SCF STATUS LIF command to verify that the associated LIFs are in the

STOPPED state (see Example 3-24).

STATUS LIF $ZZLAN.*

3. Abort the G4SA object and its subordinate objects by using either method:

•

Use the SCF ABORT ADAPTER command with the SUB ALL option.

ABORT ADAPTER $adapter-name, SUB ALL

The SUB ALL option aborts the ADAPTER object and all its subordinate

objects.

•

Or, use the OSM Service Connection:

1. Log on.

2. Expand the tree pane to locate and select the G4SA.

3. Right-click the G4SA and select Actions.

4. Select Abort from the list of actions.

5. Click Perform action.

4. Use the SCF STATUS ADAPTER command to verify that the G4SA ADAPTER

object is in the STOPPED state (see Example 3-25).

STATUS ADAPTER $adapter-name

Example 3-23. SCF INFO ADAPTER Command

-> INFO ADAPTER $ZZLAN.G1123

SLSA Info ADAPTER

Name Group Module Slot Type

$ZZLAN.G1123 11 2 3 G4SA

Example 3-24. SCF STATUS LIF Command

->STATUS LIF $ZZLAN.*

SLSA Status LIF

Name State Access State

$ZZLAN.L112I STOPPED UP

$ZZLAN.L112J STOPPED UP

$ZZLAN.L112K STOPPED UP

$ZZLAN.L112L STOPPED UP