Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Replacing a G4SA
Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide—528166-006
3-17
Unpack and Inspect the G4SA
5. In one hand, grasp the G4SA by its ejector latch and handle and pull the adapter out of its
slot while supporting the bottom edge of the adapter with the other hand. Place the G4SA
on the antistatic table mat, then put the adapter in an ESD protective bag.
6. Return the G4SA to its original packing container (if available).
Unpack and Inspect the G4SA
Follow the procedure described in Unpack and Inspect the G4SA on page 2-5.
Install the G4SA
Follow the procedure described in Install the G4SA on page 2-6.
Verify the Installation of the G4SA
Follow the procedure described in Verify the Installation of the G4SA on page 2-9.
VST046.vsd