Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Relocating a G4SA
Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide—528166-006
4-2
Print the G4SA Planning Worksheet
Print the G4SA Planning Worksheet
Print the G4SA Planning Worksheet and use it to record information about a G4SA.
For this worksheet, see Appendix A, G4SA Planning and Configuration Forms.
Identify Any Communications Lines and ServerNet Wide Area
Network (SWAN) Using the G4SA
Follow the procedure described in Identify Any Communications Lines and ServerNet
Wide Area Network (SWAN) Using the G4SA on page 3-2.
Redirect or Stop Any Customer Applications Using the G4SA
Follow the procedure described in Redirect or Stop Any Customer Applications Using
the G4SA on page 3-8.
Stop the Communications Lines and SWAN Concentrator Line
Using the G4SA
Follow the procedure described in Stop the Communications Lines and SWAN
Concentrator Line Using the G4SA on page 3-8.
Determine the Physical Location of the G4SA
Follow the procedure described in Determine the Physical Location of the G4SA on
page 3-13:
Abort the G4SA
1. Use the SCF INFO LIF command to determine the name of the logical interfaces
(LIFs) associated with the G4SA to be relocated (see Example 4-1):
INFO LIF $ZZLAN.*
2. Use the SCF STOP LIF command for each LIF to stop access to the logical
interfaces (LIFs) associated with the G4SA to be relocated.
STOP LIF $ZZLAN.lif-name
Example 4-1. SCF INFO LIF Command
->INFO LIF $ZZLAN.*
SLSA Info LIF
Name PIF MAC Address Type
$ZZLAN.L112I G1123.0.A 08:00:8E:00:5C:85 ETHERNET
$ZZLAN.L112J G1123.0.B 08:00:8E:00:5C:86 ETHERNET
$ZZLAN.L112K G1123.0.C 08:00:8E:00:5C:87 ETHERNET
$ZZLAN.L112L G1123.0.D 08:00:8E:00:5C:88 ETHERNET