Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Relocating a G4SA
Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide—528166-006
4-3
Abort the G4SA
If you receive a message that the LIF client is still active, use the SCF ABORT LIF
command to remove the LIF.
3. Use the SCF STATUS LIF command to verify that the LIFs associated with the
G4SA to be relocated are in the STOPPED state (see Example 4-2):
STATUS LIF $ZZLAN.*
4. Stop the G4SA object and its subordinate objects using either of the following
ways:
•
Use the SCF STOP ADAPTER command with the SUB ALL option:
STOP ADAPTER $adapter-name, SUB ALL
The SUB ALL option stops the ADAPTER object and all its subordinate objects
•
Or, use the OSM Service Connection:
1. Log on.
2. Expand the tree pane to locate and select the G4SA.
3. Right-click the G4SA and select Actions.
4. Select Abort from the list of actions.
5. Click Perform action.
5. Use the SCF STATUS ADAPTER command to verify that the G4SA ADAPTER
object is in the STOPPED state (see Example 4-3).
STATUS ADAPTER $adapter-name
Example 4-2. SCF STATUS LIF Command
->STATUS LIF $ZZLAN.*
SLSA Status LIF
Name State Access State
$ZZLAN.L112I STOPPED UP
$ZZLAN.L112J STOPPED UP
$ZZLAN.L112K STOPPED UP
$ZZLAN.L112L STOPPED UP
Example 4-3. SCF STATUS ADAPTER Command
->STATUS ADAPTER $ZZLAN.G1123
SLSA Status ADAPTER
Name State
$ZZLAN.G1123 STOPPED