Gigabit Ethernet 4-Port Adapter Installation and Support Guide

Relocating a G4SA
Gigabit Ethernet 4-Port ServerNet Adapter Installation and Support Guide—528166-006
4-5
Complete the Planning and Configuration Forms
Complete the Planning and Configuration Forms
Follow the procedure described in Complete the Planning and Configuration Forms on
page 2-2 to complete new planning and configuration forms for the relocated G4SA.
Enter the group number for this enclosure in the Group Number field.
Add and Start the G4SA Using SCF
Using your completed G4SA configuration form as a guide, follow the procedure
described in Adding and Starting the G4SA on page 2-9.
Troubleshooting
If the SCF STATUS SAC command shows that the G4SA SAC object is still in the
STARTING state after a few minutes or if the OSM Service Connection indicates that
the resource needs attention, follow the procedure described in Troubleshooting on
page 2-11.
Table 4-3. Resuming Operations Checklist
Step Description
1.
Complete the Planning and Configuration Forms
2.
Add and Start the G4SA Using SCF