Gigabit Ethernet ServerNet Adapter Installation and Support Guide

Contents
Gigabit Ethernet Adapter Installation and Support Guide—523628.005
iii
4. Relocating a GESA (continued)
4. Relocating a GESA (continued)
Determine the Physical Location of the GESA 4-3
Stop the GESA 4-3
Locate the New Slot 4-4
Label the Communication Cable Connected to the GESA 4-4
Remove and Relocate the GESA 4-5
Review Standard Operating Practices 4-5
Remove the Adapter 4-5
Move the GESA and Install It in Its New Slot 4-5
Verify the Installation of the GESA 4-5
Resume Operations 4-5
Complete the Configuration Form 4-6
Add and Start the GESA Using SCF 4-6
Troubleshooting 4-6
A. GESA Configuration Form
B. Preparing a GESA for PMF or IOMF CRU Replacement
Safety and Compliance
Glossary
Index
Examples
Example 2-1. SCF STATUS Commands 2-17
Example 3-1.
SCF INFO LIF Command 3-4
Example 3-2.
SCF INFO SUBNET Command 3-5
Example 3-3. SCF INFO SUBNET Command (NonStop TCP/IPv6) 3-5
Example 3-4. SCF NAMES Command 3-6
Example 3-5. SCF INFO LINE Command 3-6
Example 3-6. SCF NAMES SUBSYS Command 3-6
Example 3-7. SCF INFO PROCESS Command 3-7
Example 3-8. SCF LISTDEV Command 3-7
Example 3-9. SCF INFO LINE Command 3-8
Example 3-10. SCF NAMES ADAPTER command 3-8
Example 3-11. SCF INFO ADAPTER command 3-8
Example 3-12. SCF INFO DEVICE command 3-9
Example 3-13. SCF STATUS LINE Command 3-10