Gigabit Ethernet ServerNet Adapter Installation and Support Guide

Replacing a GESA
Gigabit Ethernet Adapter Installation and Support Guide—523628.005
3-10
Stop the Communications Lines and SWAN
Concentrator Line Using the GESA
•
To verify an Expand multiline path is stopped, use the SCF STATUS PATH
command (see Example 3-14):
STATUS PATH $path-name
3. Use the SCF STOP DEVICE command to stop the WAN subsystem IOPs.
STOP DEVICE $ZZWAN.#device-name
4. Use the SCF STATUS DEVICE command to verify that the WAN subsystem IOPs
are in the STOPPED state (see Example 3-15).
STATUS DEVICE $ZZWAN.#device-name
5. Use the SCF STOP ADAPTER command with the SUB ALL option to stop the
SWAN concentrator.
STOP ADAPTER $ZZWAN.#adapter-name, SUB ALL
The SUB ALL option stops the ADAPTER object and its subordinate objects.
6. Use the SCF STATUS ADAPTER command to verify that the SWAN concentrator
is in the STOPPED state (see Example 3-16).
STATUS ADAPTER $ZZWAN.#adapter-name
Example 3-13. SCF STATUS LINE Command
->STATUS LINE $LINE1
EXPAND Status LINE
Name State PPID BPID CIU-Path ConMgr-LDEV
$LINE1 STOPPED 2, 10 3, 7 A 91
Example 3-14. SCF STATUS PATH Command
->STATUS PATH $PATH
EXPAND Status PATH
Name State PPID BPID Lines #
$PATH STOPPED 2, 15 3, 15 2
Example 3-15. SCF STATUS DEVICE Command
->STATUS DEVICE $ZZWAN.#LINE1
WAN Manager STATUS DEVICE for DEVICE \COWBOY.$ZZWAN.#LINE1
State :........ STOPPED
LDEV number.... 110
PPIN........... 2 ,13 BPIN......... 3 ,14