GPA Manual for G-series RVUs

Guardian Performance Analyzer (GPA) Manual – (544977-001) Page 48 of 106
Up to eight PINs can be configured for each logical disk volume.
(4)
NET CHNG: The recommended change to the number of disk
subprocesses for the logical volume. This change requires a SYSGEN.
(5)
NEW PINS: The total number of PINS after the net change is applied. This
analysis considers CPU cycle availability, PCB availability, memory
availability, and rquest traffic. Based on all of these factors, it recommends
adding or deleting disk subprocesses.
Processor/Disk Configuration Diagram
The following diagram (Example 3-10) shows system information in a form that
represents the system’s physical configuration. The layout of the diagram gives a
quick overview of how the disk processing load is distributed over the system.
Please note that if server contains more than eight CPUs the report will be split in two
from 0-7 and 8-15.
Example 3-10. Processor/Disk Configuration Diagram
PROCESSOR/DISK CONFIGURATION DIAGRAM
1
CPU 0 1 2 3
2
TYPE NSR-Z NSR-Z NSR-Z NSR-Z
3
BUSY 18.1 20.7 17.9 8.8
4
FREE 775568 PG 593288 PG 990697 PG 769472 PG
5 GMS001.01.007 > 1 0<GMS011.01.007 GMS002.01.015 > 3 2<GMS021.01.005
6 $APPLE $AUDIT $BANANA $BFS002
7 0.0/ 6128/ 0 0.0/ 3536/ 0 0.0/ 3536/ 0 0.0/ 4248/ 2
$APTOS $BEACH $FSDEVL
0.0/ 26488/ 10 0.0/ 12952/ 2 0.0/ 9424/ 7
$BFS001 $ESD001 $VADT1
0.8/ 3960/144 0.0/ 2768/ 0 0.0/ 3328/ 1
$BLAST $FIG
0.0/ 3168/ 0 0.0/ 4920/ 0
For each processor on the node, the diagram shows:
(1)
CPU: The CPU number.
(2)
CPU TYPE: The processor type.
(3)
BUSY: The total percentage busy time.