GPA Manual

Using GPA Information
Guardian Performance Analyzer (GPA) Manual—135081
4-40
Error Reports
Error Reports
The final kind of report that GPA provides is the error report. The GPA Error Report
informs you of system errors and diagnoses them. There are two types of errors that can
occur:
•
Fatal errors that cause GPA to terminate.
•
Non-fatal errors, on which GPA bases its performance-enhancing recommendations.
Example 4-47
is an example of an error report that contains both fatal and non-fatal
errors.
Example 4-47. Error Report
****************************************************************
GPA
****************************************************************
GPA0B0800 CPU data contains information from multiple nodes.
GPA0B0800 This situation indicates that multiple measurements
GPA0B0800 have been loaded into the same CPU file prior to
GPA0B0800 the execution of the compiled queries. Perform a
GPA0B0800 FUP purgedata CPU, reload the CPU file and rerun
GPA0B0800 the OBEYTUNE command file.
GPA Program terminated due to errors noted in the
loading of the measure data to be analyzed.
Correct the data as recommended and re-run the
GPA analysis.
****************************************************************
GPA
****************************************************************
GPA0B0820 CPU DATA ERROR - CPU RECORD: #00001
GPA0B0828 Invalid Memory Pages - 16384
GPA0B0828 for CPU type TXP
****************************************************************
GPA
****************************************************************
GPA Non Fatal Data Input error(s) were detected and
GPA reported. The analysis may be invalid.