Guardian Disk and Tape Utilities Reference

Effect. RESTORE fails and terminates.
Recovery. Specify either ON, OFF, PARTIAL, or no parameter for the PARTONLY parameter, then
reissue the RESTORE command. Specifying no parameter is the same as specifying ON.
7836
Invalid CATALOGFILES NUMBER. Must be in the range 1...20000
Cause. A RESTORE command was issued including both the NOSQLDATA and SQLCATALOGS
option, which cannot be used in the same command.
An invalid CATALOGFILES NUMBER (value of every-n-files ) was specified.
Effect. BACKUP terminates.
Recovery. Ensure that CATALOGFILES NUMBER is an integer value in the range 1 through 20,000.
7837
Invalid REMOTE SYSTEM VOLUME NAME. Must be in the range 1 TO
7(including $)
Cause. Remote system volume name has more than seven characters (including $). Volume names
that have more than seven characters (including $) are not supported.
Effect. RESTORE fails and terminates.
Recovery. Ensure the remote system volume name is less than 7 characters (including $) before
reissuing the command.
7900
Target must be specified by a logical device number
Cause. In a volume-mode RESTORE operation, the parameter specified with the TARGET option
must be a logical device number.
Effect. RESTORE fails and terminates.
Recovery. Specify a valid device number for the TARGET option and reissue the command.
8000
Tape DEFINE define is not CLASS TAPE.
Cause. A DEFINE was specified that was not CLASS TAPE.
Effect. BACKUP or RESTORE terminates.
Recovery. Specify a CLASS TAPE DEFINE.
8001
Tape DEFINE define is not LABELS BACKUP.
Cause. A DEFINE was specified that was not LABELS BACKUP.
Effect. BACKUP terminates.
Recovery. Specify a LABELS BACKUP DEFINE.
7836 233