Guardian Procedure Calls Reference Manual (G06.25+)

Guardian Procedure Calls (S)
Guardian Procedure Calls Reference Manual—522629-013
14-50
SET^FILE Procedure
SET^COUNTXFERRED Sets the physical I/O
count, in bytes,
transferred for the file.
This is used only if
nowait I/O is in effect
and the user is making
the call to AWAITIO for
the file. This is the
<count-transferred>
parameter value
returned from AWAITIO.
<new-
count>
<count>
Open
SET^CRLF^BREAK Sets or clears carriage
return/line feed (CR/LF)
on BREAK for the file. If
on, a CR/LF is executed
on the terminal when the
BREAK key is pressed.
<new-state> <state>
Open
SET^EDITLINE^
INCREMENT
Specifies the EDIT line
increment to be added to
successive line numbers
for lines that will be
added to the file. The
value should be
specified as 1000 times
the line number
increment value. The
default value is 1000,
which corresponds to an
increment of 1. The
possible EDIT line
numbers are from 0 to
99999.999
<new-
increment>
<increment>
Open
Table 14-2. SET^FILE Operations That Set Values (page 5 of 10)
operation
Description of
Operation Requested new-value old-value
State
of
File