Guardian Procedure Calls Reference Manual (G06.25+)

Guardian Procedure Calls (S)
Guardian Procedure Calls Reference Manual—522629-013
14-69
SETMODE Procedure
This function operates only on Guardian objects. If an OSS file is specified,
file-system error 2 occurs.
2 Disk: Set file owner
param1.<0:7> = group ID
.<8:15> = member ID
param2 is not used with function 2.
If this SETMODE function is used on a file that is protected by a Safeguard
disk-file authorization record, and if the user is not logged on with the super
ID on the system where the file is located, error 199 is returned.
2,
continued
This function operates only on Guardian objects. If an OSS file is specified,
file-system error 2 occurs.
3 Disk: Set write verification
param1.<15> = 0 verified writes off (default).
= 1 verified writes on.
param2 is used with DP2 disk files only.
param2 = 0 change the open option setting of the verify writes
option (default).
= 1 change the file label default value of the verify writes
option.
Table 14-4. SETMODE Functions (page 2 of 34)
function Parameters and Effect