Guardian Procedure Calls Reference Manual (G06.25+)

Guardian Procedure Calls (S)
Guardian Procedure Calls Reference Manual—522629-013
14-80
SETMODE Procedure
37,
continued
last-params for printer (subtype 4)
last-params [0] = primary status returned from printer:
.<9:11> = full status field 0 = partial status
1 = full status
2 = full status / VFU fault
3 = reserved for future use
4 = full status / data parity error
5 = full status / buffer overflow
6 = full status / bail open
7 = full status / auxiliary status
available
.<12> = buffer full 0 = not full
1 = full
.<13> = paper out 0 = OK
1 = paper out
.<14> = device power on 0 = OK
1 = POWER ON error
.<15> = device not ready 0 = ready
1 = not ready
All other bits are undefined.
last-params[1] = auxiliary status word if last-
params[0].<9:11> = 7; auxiliary
status word is as follows:
.<9:13>= auxiliary status0= no errors this
field
1= no shuttle motion
2= character generator absent
3= VFU channel error
4-31= reserved for future use
.<14:15> = always 3
All other bits are undefined.
last-params for printer (subtype 6)
last-params [0] contains the primary status.
[1] contains the auxiliary status.
Table 14-4. SETMODE Functions (page 13 of 34)
function Parameters and Effect