Guardian Procedure Calls Reference Manual (G06.25+)

Guardian Procedure Calls (C)
Guardian Procedure Calls Reference Manual—522629-013
3-106
CONFIG_GETINFO_BYNAME_ Procedure
(G-Series and H-Series RVUs Only)
mirror_subtype
Subtype of the magnetic disk located on the mirror volume. For more information
about device subtypes, see Appendix A, Device Types and Subtypes
.
audited
(For magnetic disk and SCSI-IOP devices only.) This volume is currently audited
for TMF
demountable
(For magnetic disk and SCSI-IOP devices only.) Always 1 - the volume can be
always be removed
reserve1
(For magnetic disk and SCSI-IOP devices only.) (not used)
flags
(For magnetic disk and SCSI-IOP devices only.)
<15> = 1 Volume is in SOFTDOWN state
<14> = 1 Backup DP2 is in SOFTDOWN state
path^info
(For magnetic disk and SCSI-IOP devices only.) Array of STRUCT
STORAGE_PATH_INFO_HEADER_DEF(*), one for each path
configured
Equal to -1 if the path is configured, equal to 0 if the path is not configured. Devices
such as terminals and tape drives have only one path configured; disks can have
two or four paths configured.
inuse
Equal to -1 if the path is currently in use by the IOP that owns the device, equal to
0 if it is not.
state
The current state of the path. If the device has only one path, then the state of the
device is the state of the path. Valid state values are:
Value Description
0UP
1DOWN
2 SPECIAL