Guardian Procedure Calls Reference Manual (G06.25+)

Guardian Procedure Calls (C)
Guardian Procedure Calls Reference Manual—522629-013
3-110
CONFIG_GETINFO_BYNAME_ Procedure
(G-Series and H-Series RVUs Only)
access_state
Indicates whether there is at least one processor with a data path through the PIF
associated with the specified LIF. A value of 2 (UP
) indicates at least one
processor with a data path. A value of 1 (DOWN
) indicates that there is no data
path.
Lif_Potential_Access_Template
Lists processors that potentially can have a data path through the PIF associated
with the specified LIF. The processors are listed in numerical order.
Lif_Actual_Access_Template
Lists processors that have a successful data path for the PIF associated with the
specified LIF. NONE means that no processor has a data path through the PIF.
The processors are listed in numerical order.
ServerNet Wide Area Network (SWAN)
Below is the structure definition for the specific_info parameter when returned by
a device that uses ServerNet wide area network (SWAN) connectivity. The structure is
defined by the wide area network (WAN) subsystem. Devices for many HP
communication subsystems, including AM3270, ATP, CP6100, Envoy and Envoy
ACP/XF, Expand, SNAX/XF and SNAX/APN, TR3271, and X25AM support SWAN
connectivity in NonStop S-series servers. (The structure definition below applies only
to the subsystems identified here.) Note that if an Expand or a SNAX device does not