Guardian Procedure Calls Reference Manual (G06.25+)

Guardian Procedure Calls (C)
Guardian Procedure Calls Reference Manual—522629-013
3-112
CONFIG_GETINFO_BYNAME_ Procedure
(G-Series and H-Series RVUs Only)
Z^CLIPNUM
is the clip number that identifies which clip number is being used. The valid range
for the clip number is 1 through 3.
Z^UNIT
is reserved. It is redefined by Z^LINENUM.
Z^LINENUM
identifies the line number (0 or 1) on a clip that is being used.
Z^CPU
is the processor that is currently being used to run the LINE. The LINE is a
Subsystem Programmatic Interface (SPI) object in a subsystem.
Z^TRACKID
is a six-character string number that identifies the SWAN box.
Z^IPADDRESS
is the IP address that is currently being used to access the SWAN.