Guardian Procedure Calls Reference Manual (G06.25+)

Guardian Procedure Calls (F)
Guardian Procedure Calls Reference Manual—522629-013
5-88
FILE_GETINFOLIST_ Procedure
1009 2 Tape or Open SCSI process: Current device state
0up
1down
1010 2 Tape process: current device status
0 not ready
1 online or ready
1011 2 Tape process: Short write mode
-1 unsupported or unknown
0 allow writes shorter than 24 bytes; a record shorter than
24 bytes is padded with zeros to a length of 24 bytes
(default).
1 disallow writes shorter than 24 bytes.
2 allow writes shorter than 24 bytes; no padding is done
on records shorter than 24 bytes.
1012 2 Tape process: Checksum mode
0 normal I/O mode
1 checksum mode
1013 2 Tape or Open SCSI process: Tracing level
0no tracing
xx tracing level
1014 2 Tape or Open SCSI process: Number of openers
1 1 opener (might be exclusive)
xx openers
1015 2 Tape process: Current controller state
-1 unknown
0 unloaded
1 loaded
1016 2 Tape process: Current assignment status
-1 no applicable
0 unassigned
1 assigned (5188 tape drive only)
Table 5-4. FILE_GETINFOLIST_ Item Codes (page 20 of 21)
Items in this table with a size of 2 bytes are of data type INT. The term “disk file”
applies only to Enscribe files. The term “disk object” applies to Enscribe files and
SQL objects. Items described as “Applies only to SQL/MX objects” return file system
error 2 if queried on anything that is not an SQL/MX object.
Item
Code
Size
(Bytes) Description