Guardian Procedure Calls Reference Manual

MIRROR_SUBTYPE
Subtype of the magnetic disk located on the mirror volume. For more information about device
subtypes, see Appendix A: Device Types and Subtypes.
AUDITED
(For magnetic disk and SCSI-IOP devices only.) This volume is currently audited for TMF.
DEMOUNTABLE
(For magnetic disk and SCSI-IOP devices only.) Always 1. The volume can be always be
removed.
RESERVE1
(For magnetic disk and SCSI-IOP devices only.) (Not used.)
FLAGS
(For magnetic disk and SCSI-IOP devices only.)
Volume is in SOFTDOWN state.<15> = 1
Backup DP2 is in SOFTDOWN state.<14> = 1
PATH^INFO
(For magnetic disk and SCSI-IOP devices only.) Array of STRUCT
STORAGE_PATHINFO_HEADER_DEF(*), one for each path:
CONFIGURED
Equal to -1 if the path is configured, equal to 0 if the path is not configured. Devices such
as terminals and tape drives have only one path configured; disks can have two or four
paths configured.
INUSE
Equal to -1 if the path is currently in use by the IOP that owns the device, equal to 0 if it is
not.
STATE
The current state of the path. If the device has only one path, then the state of the device
is the state of the path. Valid state values are:
DescriptionValue
UP0
DOWN1
SPECIAL2
MOUNT3
REVIVE4
(reserved)5
EXERCISE6
EXCLUSIVE7
HARD DOWN8
UNKNOWN9
GROUP
All objects accessible to a pair of service processors in a system enclosure. In a NonStop
S-series server, a group includes all components in a system enclosure. The valid range is
from 1 through 999.
CONFIG_GETINFO_BYNAME_ Procedure 193