Guardian Procedure Errors and Messages Manual

Recovery Corrective action is application dependent.
183 (%267) SNA session has ended.
(device type: 14.2)
Cause The file-system procedure call issued by the primary or secondary logical unit was not
performed because the logical-unit-to-logical-unit session associated with the specified device
(filenum) no longer exists.
Effect The procedure sets the error code and returns without performing the requested operation.
Recovery Close, then reopen the process.
187 (%273) Operation returning with no useful data
Cause CONTROL 26 was previously issued to complete all outstanding requests from this
application.
Effect All pending and active READ, WRITE, and WRITEREAD requests are completed, and no
data is transferred.
Recovery Recovery is application dependent.
188 (%274) Damage to logical flow of events.
Cause CONTROL 26 was previously issued to complete all outstanding requests from this
application.
Effect The state of the session is suspect.
Recovery Recovery is application dependent.
189 (%275) Response not yet available.
Cause CONTROL 26 was previously issued to complete all outstanding requests from this
application.
Effect The requesting program concludes that the actions initiated by a READ, WRITE, or WRITEREAD
request are in progress, and the response that was returned is not yet available.
Recovery Recovery is application dependent. A generic read operation retrieves the response when
the response is available.
190 (%276) Device error; hardware problem.
(device type: any except 2)
Cause A hardware error occurred and persisted through several retries of the operation. A problem
exists with either the device or its controller. The error might be caused by a termination condition
that was not expected.
Effect The procedure sets the error code and returns without performing the requested operation.
Recovery Corrective action is device dependent. If this problem persists and a data communications
process is involved, obtain a trace and submit it to your service provider.
191 (%277) Device power on (device type: 5),
or terminal reset (device type: 6).
Error Code Descriptions 57