Guardian Procedure Errors and Messages Manual

Cause A controller or channel failure occurred (path error).
Effect The file operation stopped at some indeterminate point.
Recovery Corrective action is device dependent and application dependent.
215 (%327) I/O attempted to absent memory
page (hardware path error).
(device type: any except 2)
Cause A hardware failure occurred (path error).
Effect The file operation stopped at some indeterminate point.
Recovery Corrective action is device dependent and application dependent.
216 (%330) Memory breakpoint encountered during
this I/O operation. (device type: any except 2)
Cause A memory-access breakpoint was encountered during this operation.
Effect The file operation stopped at some indeterminate point.
Recovery If the breakpoint was not intentionally set, clear it using Debug. Note which system call
was used in the application and which system process is affected. If the problem persists, contact
your service provider.
217 (%331) Memory parity error during this
I/O (hardware path error).
(device type: any except 2)
Cause A hardware failure occurred (path error).
Effect The file operation stopped at some indeterminate point.
Recovery Corrective action is device dependent and application dependent.
218 (%332) Interrupt timeout occurred on a channel,
or a controller, modem, or the line between,
or lost the modem clock (path error).
(device type: any except 2)
Cause A controller failure, channel failure, line disconnect between controller and modem, or loss
of modem clock occurred (path error).
Effect The file operation stopped at some indeterminate point.
Recovery Corrective action is device dependent and application dependent.
219 (%333) Illegal device reconnect (path error).
(device type: any except 2)
Cause An invalid device reconnect occurred (path error).
Effect The file operation stopped at some indeterminate point.
Recovery Corrective action is device dependent and application dependent.
220 (%334) Protect violation; an I/O controller
attempted an illegal write.
(device type: any except 2)
Error Code Descriptions 61