Guardian Programming Reference Summary for C

Error Codes

Guardian Programming Reference Summary for C—522630-001

15-5

135 Write-protect violation with disk

136 Unit ownership error (dual-port disk)

137 Controller buffer parity error

138 Interrupt overrun

139 Controller error

140 Modem error (communication link not yet established, modem failure,

momentary loss of carrier, or disconnect) or FOX link to an EXPAND line handler

is down

148 Invalid read or write from/to an optical disk

150 End-of-tape marker detected

151 Runaway tape detected, or attempt to access a tape whose density is lower than

the switch setting on the tape drive

152 Unusual end or tape unit went offline or CP6100 file closed while requests in

progress

153 Tape drive power on

154 BOT detected during backspace files or backspace records

155 Only nine-track magnetic tape allowed

156 Tape command rejected or communication protocol violation detected

157 I/O process internal error

158 Invalid function requested for Hyper Link

159 Device mode wrong for request, or attempt to execute the PUP PRIMARY

command while the tape drive is waiting for a labeled tape mount

160 Request is invalid for device state

161 Impossible event occurred for line state

162 Operation timed out

163 EOT received or power at auto-call unit is off

164 Disconnect received or data line is occupied (busy)

165 RVI received or data line not occupied after setting call request

166 ENQ received or auto-call unit failed to set “present next digit”

167 EOT received on line bid or “data set status” not set after dialing all digits

168 NAK received on line bid or auto-call unit failed to clear “present next digit” after

“digit present” was set

169 WACK received on line bid or auto-call unit set “abandon call and retry” or