Guardian Programming Reference Summary for pTAL and TAL

Guardian Programming Reference Summary for pTAL and TAL—522631-001
3-1
3
Device Types and Subtypes
Table 3-1. Device Types and Subtypes (page 1 of 14)
Type Device
Sub
type D-Series Description G-Series Description
0 Process 0 Default subtype for general
use
Default subtype for
general use
1-49 Reserved for definition by
Tandem. The following
subtypes are defined:
1 = CMI process
2 = Security monitor process
30 = Device simulation
process
31 = Spooler collector
process
Reserved for definition by
Tandem. The following
subtypes are defined:
1 = CMI process
2 = Security monitor
process
30 = WANBOOT process
31 = Spooler collector
process
48 = TFTP server process
49 = SNMP trap
multiplexor
50-
63
For general use For general use
1 Operator con-
sole
0 $0 (operator process) or
alternate collector
$0 (operator process) or
alternate collector
1 $0.#ZSPI ($0 opened to
receive SPI commands)
$0.#ZSPI ($0 opened to
receive SPI commands)
2 $Z0 (compatibility
distributor)
$Z0 (compatibility
distributor)
2$RECEIVE 0
3 Disk 2 4103 (160 MB formatted
capacity)
N.A.
3 4104 (240 MB formatted
capacity)
N.A.
4 4105 or 4106 (64 MB
formatted capacity)
N.A.
5 4109 (moving-head part, 64
MB formatted capacity)
N.A.
6 4116 (540 MB formatted
capacity)
N.A.