Guardian Programming Reference Summary for pTAL and TAL

SETMODE Operations
Guardian Programming Reference Summary for pTAL and TAL—522631-001
11-7
22
(continued)
You can specify split baud rates with the LIU-4 controller as follows. Note that
the values for param1 all have bit 0 set to 1:
param1 =
128 TX baud rate = 50
129 TX baud rate = 75
130 TX baud rate = 110
131 TX baud rate = 134.5
132 TX baud rate = 150
133 TX baud rate = 300
134 TX baud rate = 600
135 TX baud rate = 1200
136 TX baud rate = 1800
137 TX baud rate = 2000
138 TX baud rate = 2400
140 TX baud rate = 4800
141 TX baud rate = 7200
142 TX baud rate = 9600
143 TX baud rate = 19200
144 TX baud rate = 200
param2 =
0 RX baud rate = 50
1 RX baud rate = 75
2 RX baud rate = 110
3 RX baud rate = 134.5
4 RX baud rate = 150
5 RX baud rate = 300
6 RX baud rate = 600
7 RX baud rate = 1200
8 RX baud rate = 1800
9 RX baud rate = 2000
10 RX baud rate = 2400
12 RX baud rate = 4800
13 RX baud rate = 7200
14 RX baud rate = 9600
15 RX baud rate = 19200
16 RX baud rate = 200
If you specify split baud rates with the LIU-4 controller, the last-params
parameter returns the following values:
last-params [0] .<0:7>
param1 value (TX)
.<8:15> param2 value (RX)
last-params [1]undefined
<function> Parameters and Effect