Guardian Programming Reference Summary for pTAL and TAL

SETMODE Operations
Guardian Programming Reference Summary for pTAL and TAL—522631-001
11-20
<function> Parameters and Effect
110 Set Shift In/Shift Out (SISO) code extension technique for an individual
subdevice
Note:
SETMODE 110 is supported in AM6520 for CRT protocol when used for 6530
terminals, ITI protocol for 6530 terminals, and PRT protocol for 5520 printers.
param1
= 0 disable SISO (default setting)
= 1 enable SISO
Theparam2 parameter is not used with function 110.
112 Session in Between Brackets (BETB) state
Places SNAX LU-LU session in BETB state so that either the first speaker or
the bidder can bid to open a new bracket.
param1
= 0 disable
= 1 enable placing session in the BETB state
113 Set screen size
param1 = the screen width (40, 66, 80, or 132)
param2 = the screen length (25 or 28)
The last-params parameter is an integer reference parameter containing
two elements:
last-params[0]= old param1
[1]= old param2
115 SNA Control Request Notification
param1
= 0 disable
= 1 enable control request notification
Users of CRT protocol can receive notification that a CINIT or CTERM
request has been sent by the SSCP to the PLU.
116 Terminal: Establish extended address field for ADCCP (ABM only) combined
stations.
See the Envoy ACP/XF Reference Manual.