Guardian Programming Reference Summary for pTAL and TAL

Error Codes
Guardian Programming Reference Summary for pTAL and TAL—522631-001
15-6
169 WACK received on line bid or auto-call unit set “abandon call and retry” or
station disabled or station not defined
170 No ID sequence received during circuit assurance mode or invalid MCW entry
number on write
171 No response received on bid/poll/select, or reply invalid
172 Reply not proper for protocol
173 Maximum allowable NAKs received (transmission error) or invalid MCW on
write or invalid request ID
174 WACK received or CLB frame aborted
175 Incorrect alternating ACK received or command reject
176 POLL sequence ended with no responder
177 Text overrun (insufficient buffer space for data transfer)
178 No address list specified
179 Application buffer is incorrect or control request pending or autopoll active
180 Unknown device status received
181 Status receipt currently enabled for subdevice
182 SNALU access method outbound RU error
183 SNA session has ended
187 Operation returning with no useful data
188 Damage to logical flow of events
189 Response not yet available
190 Device error
191 Device power on or terminal reset
192 Device in diagnose mode
193 Invalid or missing microcode file
194 Device use or mount request rejected by operator
195 Operation requires use of $ZSVR but it is not running
196 Tape label record missing or incorrect
197 An SQL error occurred
198 A DEFINE of the given name could not be found
199 Disk file is Safeguard protected
200 Device is owned by alternate port
201 Current path to the device is down or attempt was made to write to a nonexistent
process or error in message system interface
210 Device ownership changed during operation
Code Description