Guardian User's Guide

ManualsBrandsHP ManualsServerHP NonStop G-Series

381

382

383

384

385

386

387

388

389

390

Monitoring Hardware Components

Guardian User’s Guide—425266-001

19-5

Example

In this example, the SCF LISTDEV command lists all the devices on the system

\SHARK.

Determining Device States

This subsection explains how to determine the state of devices on your system and

understand the meanings of the various states.

You use the Subsystem Control Facility (SCF) to display the configuration

characteristics of all the devices on your system. See the SCF Reference Manual for G-

Series Releases for complete information about SCF, its commands and options, and

device types and subtypes.

To display only the configuration information (attributes and their values) for an object,

use the INFO command. INFO does not display dynamic information.

To check the current state of all disk devices on your system, enter:

> SCF STATUS DISK $*

The format of the STATUS display is shown below.

1-> SCF LISTDEV

SCF - T9082F40 - (29FEB96) (01JAN96) - 09/18/96 16:33:11 System \SHARK

LDev Name PPID BPID Type RSize Pri Program

1 $NCP 0,22 0,0 (62,6 ) 3 199 \SHARK.$SYSTEM.SYS00.NCPOBJ

3 $YMIOP 0,6 1,6 ( 6,4 ) 80 205 \SHARK.$SYSTEM.SYS00.OSIMAGE

6 $SYSTEM 0,256 1,256 ( 3,41) 4096 220 \SHARK.$SYSTEM.SYS00.OSIMAGE

25 $ZZKRN 0,17 1,5535 (66,0 ) 132 180 \SHARK.$SYSTEM.SYS00.OZKRN

26 $ZZWAN 0,288 1,5535 (50,3 ) 132 180 \SHARK.$SYSTEM.SYS00.WANMGR

27 $ZZSTO 0,289 1,5535 (65,96) 64801 180 \SHARK.$SYSTEM.SYS00.TZSTO

28 $ZZLAN 0,16 1,5535 (43,0 ) 132 180 \SHARK.$SYSTEM.SYS00.LANMAN

30 $ZSNET 0,17 1,5535 (66,0 ) 132 180 \SHARK.$SYSTEM.SYS00.OZKRN

46 $ZM00 0,18 0,0 (45,0 ) 132 201 \SHARK.$SYSTEM.SYS00.QIOMON

48 $TAPE1 0,274 1,5535 ( 4,6 ) 2048 200 \SHARK.$SYSTEM.SYS00.OTPPROCP

49 $TAPE0 0,273 1,5535 ( 4,9 ) 2048 200 \SHARK.$SYSTEM.SYS00.OTPPROCP

52 $DATA12 3,262 2,5535 ( 3,41) 4096 220 \SHARK.$SYSTEM.SYS00.TSYSDP2

53 $DATA11 3,263 2,5535 ( 3,41) 4096 220 \SHARK.$SYSTEM.SYS00.TSYSDP2

54 $DATA10 3,264 2,5535 ( 3,34) 4096 220 \SHARK.$SYSTEM.SYS00.TSYSDP2

60 $DATA04 0,270 1,5535 ( 3,40) 4096 220 \SHARK.$SYSTEM.SYS00.TSYSDP2

62 $DATA02 0,268 1,5535 ( 3,34) 4096 220 \SHARK.$SYSTEM.SYS00.TSYSDP2

63 $DATA01 0,267 1,5535 ( 3,40) 4096 220 \SHARK.$SYSTEM.SYS00.TSYSDP2

64 $DATA00 0,266 1,5535 ( 3,41) 4096 220 \SHARK.$SYSTEM.SYS00.TSYSDP2

69 $ZZW00 0,295 0,0 (50,0 ) 0 199 \SHARK.$SYSTEM.SYS00.CONMGR

72 $ZZW16 0,296 0,0 (50,4 ) 132 180 \SHARK.$SYSTEM.SYS00.WANBOOT

73 $EXPIP 0,20 1,5535 (63,0 ) 3 199 \SHARK.$SYSTEM.SYS00.LHOBJ

76 $ZNET 0,24 0,0 (50,63) 3900 165 \SHARK.$SYSTEM.SYS00.SCP

77 $ZTC0 0,297 0,0 (48,0 ) 32000 200 \SHARK.$SYSTEM.SYS00.TCPIP

78 $ZTNT 0,299 0,0 (46,0 ) 6144 170 \SHARK.$SYSTEM.ZTCPIP.TELSERV

subsystem STATUS object-type object-name

Name State PPID BPID attr1 attr2 attr3 …

object-name1 state nn,nnn nn,nnn val1 val2 val3 …

object-name2 state nn,nnn nn,nnn val1 val2 val3 …