Inspect Manual

High-Level Inspect Commands
Inspect Manual—429164-006
6-55
Examples that Display SPI Buffers
asterisk marks the token at the current position in the buffer. In this example, a
parameter was missing from the command buffer:
2. This command displays an event-message buffer named EVENT-BUFFER.
Inspect uses the EMSGET procedure to extract information from the buffer:
-OBJ-DISPLAY spi-buffer TYPE SPI-NUM
ZSPI-TKN-HDRTYPE = 0 (ZSPI-VAL-CMDDHR)
ZSPI-TKN-CHECKSUM = 0
ZSPI-TKN-COMMAND = 2
ZSPI-TKN-LASTERR = -8 (ZSPI-TKN-MISTKN) - Token not found
ZSPI-TKN-LASTERRCODE = 486866497 (29,4,-506)
ZSPI-TKN-MAX-FIELD-VERSION = 0
ZSPI-TKN-MAX-RESP = 0
ZSPI-TKN-OBJECT-TYPE = 13
ZSPI-TKN-SERVER-VERSION = 17152 C10
ZSPI-TKN-SSID = TANDEM.DNS.C10
ZSPI-TKN-USEDLEN = 128
BUFFER LENGTH = 4196
TANDEM.DNS.C10 (11,2,7) = 26
TANDEM.DNS.C10 *(11,2,0) = -33
TANDEM.DNS.C10 (37,0,-252) - ERROR LIST
TANDEM.DNS.C10 (28,14,-251) = TANDEM.DNS.C10 33
TANDEM.DNS.C10 (7,255,-250) - LENGTH 3 = ?1 ?0 ?1
TANDEM.DNS.C10 (11,2,78) = 2
TANDEM.DNS.C10 (2,4,77) = 5
TANDEM.DNS.C10 (39,0,-254) - END LIST
-OBJ-DISPLAY event-buffer TYPE EMS-NUM
ZSPI-TKN-HDRTYPE = 1 (ZSPI-VAL-EVTHDR)
ZSPI-TKN-CHECKSUM = 0
ZSPI-TKN-LASTERR = 0 (ZSPI-ERR-OK) - Operation successful
ZSPI-TKN-LASTERRCODE = 0 (0,0,0)
ZSPI-TKN-MAX-FIELD-VERSION = 0
ZSPI-TKN-SSID = TANDEM.MSGSYS.C00
ZSPI-TKN-USEDLEN = 128
ZEMS-TKN-CONSOLE-PRINT = 0 (FALSE)
ZEMS-TKN-CPU = 10
ZEMS-TKN-CRTPID = \COMM.10,0
ZEMS-TKN-EMPHASIS = 0 (FALSE)
ZEMS-TKN-EVENTNUMBER = 104
ZEMS-TKN-GENTIME = 1987-09-04 17:48:13.993.437
ZEMS-TKN-LOGTIME = 1987-09-04 17:48:16.447.002
ZEMS-TKN-PIN = 0ZEMS-TKN-SUPPRESS-DISPLAY = 0 (FALSE)
ZEMS-TKN-SYSTEM = 116 \COMM
ZEMS-TKN-USERID = 255,255 SYSTEM.MANAGERBUFFER LENGTH = 128
TANDEM.MSGSYS.0 *(31,0,-523) - SUBJECT MARK
TANDEM.MSGSYS.0 (9,2,2) = 10
TANDEM.MSGSYS.0 (9,2,4) = 15
TANDEM.GUARDLIB.0 (12,2,26) = 77 0
TANDEM.GUARDLIB.0 -(9,2,25) = 3