Inspect Manual

High-Level Inspect Commands
Inspect Manual—429164-006
6-83
FA

If you issue an EXIT command interactively and one or more active processes are
running under the control of Inspect, Inspect displays a warning message. Inspect
emits a second warning message if you have any breakpoints set. For example:
Entering “Y” at the confirmation prompt will exit Inspect, but will not stop the
processes under the control of Inspect. All processes will remain under the control
of Inspect in their current state. If you do not enter a Y, Inspect does not exit;
instead, it issues a prompt. If you respond “Yes” when prompted for exit
confirmation, you can reactivate your process with the TACL ACTIVATE command.

If you are running a PATHWAY requester program and you type EXIT, you will not
be prompted to confirm that you want to stop Inspect unless you have breakpoints
set.
Related Command
RESUME with the * EXIT option
FA
The FA (“Fix Alias”) command enables you to retrieve, edit, and reissue an existing
alias definition.
When you enter an FA command, Inspect presents the ADD ALIAS command for the
specified alias in an editing template. For more information, see Editing Templates on
page 6-85.
alias-name
specifies the name of the alias you want to fix.
Usage Consideration
Aliases are not expanded when you use the FA command.
Related Commands

ADD ALIAS on page 6-7

ALIAS on page 6-17
-PROGRAM-EXIT
WARNING - You have 2 active processes:
Program
Num PID Name Type State Location
1 01,00307 X003OBJ1 TNS HOLD #X001A.#27.4(X003TAL) + %2I
*2 09,00282 X003OBJ0 TNS HOLD #main.#8(X003SRC)
WARNING - The processes above will not be stopped.
FA alias-name