Inspect Manual

High-Level Inspect Commands
Inspect Manual—429164-006
6-100
Examples
2. This illustrates listing TNS instructions starting at a given line for two statements.
Note that pressing RETURN lists the ICODE of two additional statements.
3. This illustrates listing TNS instructions starting at a given TNS address. Note that
statement numbers are not listed when an address is specified.
4. This is an example of listing TNS/R instructions from an Accelerated program.
5. This command lists the TNS/R instructions from an Accelerated program for the
statement at #80.
-OTALIN- ICODE at #73 for 2s
#73
%000052: LDI +001 ADDS -002 RSUB 01
%000055: ADDS +002 LDI +010 LDI +000
%000060: PUSH 711
#75.1
%000061: LDI +001 STOR G+000
-OTALIN-
#76
%000063: LDI +001 STOR L+001
#77
%000065: BSUB -033
-OTALIN-ICODE %65 for 20
%000065: BSUB -033 LOAD L+001 LADR L+001
%000070: LOAD L+001 PUSH 722 BSUB -033
%000073: BSUB -025 STRP 7 LOAD L+001
%000076: STOR L+002 LDI +001 LDI +000
%000101: LDI +002 LDD L+003 PUSH 744
%000104: PCAL 002 LDI +001 LDI +000
%000107: LDI +002 LDD L+003
-PTALIN-ICODE r %h70420194 for 10
%h70420194: > LI s0,1 SH s0,0($0) > SH s0,2(fp)
%h704201A0: > JAL LM^FREELIST LI a0,54 @ LH t5,2(fp)
%h704201AC: ADDI t0,fp,2 SRL s1,t0,1 ADDIU sp,sp,6
%h704201B8: SH t5,-4(sp)
-PTALIN-ICODE AT #80 FOR 1 S
#80
%h70420230: LI s0,1 LI s2,2 LWL s3,6(fp)
%h7042023C: LWR s3,9(fp) ADDIU sp,sp,10 SH s0,-8(sp)
%h70420248: SH $0,-6(sp) SH s2,-4(sp) SWL s3,-2(sp)
%h70420254: SWR s3,1(sp) JAL PROC1 LI a0,69