Inspect Manual
High-Level Inspect Commands
Inspect Manual—429164-006
6-113
Examples
If a program has a user library, information is listed for the program file and the
library file.
If the filename parameter is omitted, Inspect will display information about all object
files used by the current process (user code plus all libraries plus all system files).
Items labeled with “*1” apply only to TNS object files, items with “*2” apply only to
accelerated object files, items with “*3” apply only to native object files, and items
with “*4” apply only to native SRL object files.
Examples
1. This example illustrates the information the INFO OBJECTFILE command
presents for a program accelerated with the ProcDebug option.
2. This example illustrates the information the INFO OBJECTFILE command
presents for a TNS/R program.
-PROGRAM-INFO OBJECTFILE
Program Object File: \SYSTEM.$DISK.SUBVOL.OBJECT
General Information
BINDER Region: YES
BINDER Timestamp: 1992-08-13 17:46:40.57
Data Pages: 64
Debugger: INSPECT
INSPECT Region: YES
System Type: Guardian
Process Subtype: 0
Program File Segment: 0 WORDS
Highrequesters: OFF
Runnamed: OFF
Highpin: OFF
Saveabend: OFF
Segments: 1
Target: UNSPECIFIED
Accelerator Information
Accelerated Execution: ENABLED
Optimization: PROCDEBUG
Global Options: ATOMIC_OFF, INHERITSCC_OFF, OVTRAP_ON,
SAFEALIASINGRULES_OFF, TRUNCATEINDEXING_ON
Timestamp: 1992-08-13 18:29:17.52
Version: 1992-02-25 10:18:32.46
-DEMO-INFO OBJECT
Program Object File: \FOLK.$LORE.EXAMPLE.DEMO
General Information
NLD Timestamp: 1995-08-11 14:27:01.00
Debugger: DEBUG
Process Subtype: 0
Program File Segment: 0 WORDS
Highrequesters: OFF
Runnamed: OFF
Highpin: OFF
Saveabend: OFF