Inspect Manual

High-Level Inspect Commands
Inspect Manual—429164-006
6-116
Default Values
FD
indicates that file-number values specify OSS file descriptors. Files without
OSS file descriptors will not be displayed.
GUARDIAN
indicates that file-number values specify Guardian system file numbers.
Files without Guardian file system numbers will not be displayed.
Default Values

The default file type is Guardian file system numbers.

If you enter the INFO OPENS command without parameters, Inspect displays the
Guardian file number, physical file name, and last error of all files opened by the
current program.
Usage Considerations

Open File Information
INFO OPENS displays these information:

The file-system file number (as returned by the OPEN system procedure)

The physical file name

The file-system error number associated with the last operation on the file

The fields of the INFO OPENS command DETAIL clause
This table describes information Inspect displays for the INFO OPENS command,
DETAIL clause.
DETAIL Field Name Field Description (page 1 of 2)
FILE NUMBER File number of the opened file.
LAST ERROR Error of last operation on file.
NAME Name of file.
PRE-D00 MSGS ($RECEIVE only) reading C-series format messages or D-
series format.
DEVICE TYPE Device type of the device associated with the file.
OPEN FLAGS Flags used to open the file with.
REQUESTS OUT Type of the oldest outstanding nowaited operation.
LOG DEV Logical device number of the device where the file resides.
FILE CODE File code of file.
CUR REC Current record pointer.
PEXT SIZE Primary extent size.
NEXT REC Next record pointer.