Inspect Manual

High-Level Inspect Commands
Inspect Manual—429164-006
6-137
Default Value
Default Value
If you do not specify a function key, LIST KEY displays all function-key definitions.
Related Commands

ADD KEY on page 6-9

DELETE KEY on page 6-30

FK on page 6-90

KEY on page 6-128
LIST PROGRAM
The LIST PROGRAM command displays the list of programs being debugged.
Usage Considerations

An asterisk is displayed in front of the current program. If you are debugging a
single program, it is always the current program. If you are debugging multiple
programs, only one is the current program at any time.

The system number is available in the DETAIL listing.

The contents of the Type field are TNS, TNS SAVE, TNS/R, TNS/R SAVE, or
PATHWAY. For example:

Location strings that would extend beyond the last column are broken at the last
column and listed on the next line beginning at the starting column of the Location
field.

For PATHWAY requester programs, the PID field lists the PATHMON process
name.
LIST PROGRAM[S] [ program | * [ , ] [ DETAIL ] ]
program: one of:
program-number
program-name
-PROGRAM-LIST PROGRAM
Program
Num Program ID Name Type State Location
*1 13406 a.out TNS/R HOLD #main.#5
2 5,213 DEMO TNS/R RUN #PROC.#12