Inspect Manual

High-Level Inspect Commands
Inspect Manual—429164-006
6-139
Examples

The instruction set will be listed as TNS/E for an OCA-accelerated program on a
TNS/E system.

Location strings and program names that would extend beyond the last column are
broken at the last column and listed in the next line beginning at the starting
column of the Location field, or the Program Name field respectively.
Examples
1. This example shows the LIST PROGRAM command without the DETAIL clause.
2. This example shows output for an OSS program with the DETAIL clause.
-DEMO-LIST PROGRAM
Program
Num Program ID Name Type State Location
*1 09,00480 DEMO TNS/R HOLD #main.#5.301(SDEMO)
2 09,00490 DEMO TNS/R SAVE HOLD #main.#5.301(SDEMO)
-PROGRAM-LIST PROGRAM 1, DETAIL
Name: a.out
Number: 1
General Information
CPU,PIN: 8,160
OSS PID: 13406
GUARDIAN Version: D2
Instruction Set: TNS/R
Location: #main.#5
Program: /usr/people/paul/bin/a.out
Libraries: /usr/lib/libc.a
/usr/lib/libil8n.c
State: HOLD
System: \CUBS (175)
Type: TNS/R
INSPECT Information
ABEND Breakpoint: NO
Code Breakpoints: 1
Data Breakpoints: 0
Source System: None
STOP Breakpoint: NO