Inspect Manual

High-Level Inspect Commands
Inspect Manual—429164-006
6-141
LIST SOURCE ASSIGN
5. This example shows the DETAIL listing for an accelerated TNS object file on a
TNS/E system. In this example, the program shown in the previous example has
been processed by the TNS Object Code Accelerator (OCA).
LIST SOURCE ASSIGN
The LIST SOURCE ASSIGN command displays the source assignments from the
source-assignment list for the current Inspect session.
AS COMMAND[S]
directs LIST SOURCE ASSIGN to display the source assignments as ADD
SOURCE ASSIGN commands.
Related Commands

ADD SOURCE ASSIGN on page 6-14

DELETE SOURCE ASSIGN on page 6-31

SOURCE ASSIGN on page 6-202
-CCLE-LIST PROGRAM CCLE DETAIL
Name: CCLE
Number: 1
General Information
Accelerated: YES
Accelerated State: Register-exact
CPU,PIN: 5,7
GUARDIAN Version: H06
Instruction Set: TNS/E
Location: #CCL.#700(UMCCL)
Processor: TNS/E (NSE-P)
Program: \PIPPIN.$D0117.KRIS.CCLE
State: HOLD
System: \PIPPIN (22)
Type: TNS
INSPECT Information
ABEND Breakpoint: NO
Code Breakpoints: 0
Data Breakpoints: 0
Source System: None
STOP Breakpoint: NO
-CCLE-
LIST SOURCE ASSIGN[S] [ AS COMMAND[S] ]