Inspect Manual

High-Level Inspect Commands
Inspect Manual—429164-006
6-180
Default Value
PROGRAM PID
directs Inspect to display the current program’s process ID in the form
sys,cpu,pin.
RADIX
directs Inspect to display the current input radix: DEC, HEX, or OCTAL.
SOURCE
directs Inspect to display “(SOURCE)” if you can continue the previous
SOURCE command by pressing RETURN.
STEP
directs Inspect to display “(STEP count unit)” if you can repeat the previous
STEP command by pressing RETURN. Inspect displays the count if it is not
one, and displays the unit if it is not the default for the current level
(STATEMENTS is the high-level default; INSTRUCTIONS is the low-level
default).
SUBVOLUME
directs Inspect to display the current default subvolume.
SYSTEM
directs Inspect to display the current default system.
SYSTYPE
directs Inspect to display the current systype, either Guardian or OSS.
VOLUME
directs Inspect to display the current default volume.
Default Value
The default INSPLOCL file sets the prompt as follows:
Usage Consideration
The maximum length of Inspect’s prompt is 70 characters. Any text exceeding 70
characters will be truncated.
SET PROMPT = LEVEL,PROGRAM NAME,STEP,LEVEL