Inspect Manual

High-Level Inspect Commands
Inspect Manual—429164-006
6-185
Default Value
Default Value
The default INSPLOCL file sets SOURCE RANGE as follows:
Related Commands

SELECT SOURCE SYSTEM on page 6-169

SET SOURCE BACK and SET SOURCE FOR on page 6-183

SHOW with SOURCE RANGE option on page 6-194

SOURCE on page 6-196
SET SOURCE WRAP
The SET SOURCEþWRAP command controls whether the SOURCE command
truncates or wraps long source lines by default. When source wrapping is on, the
SOURCE command displays the full length of each source line, wrapping it onto the
next screen line if necessary.
Default Value
The default INSPLOCL file sets SOURCE WRAP as follows:
Related Commands

SHOW on page 6-194

SOURCE on page 6-196
SET SOURCE RANGE = F / L
SET SOURCE WRAP [=] { ON | OFF }
SET SOURCE WRAP = OFF