Inspect Manual

What’s New in This Manual
Inspect Manual—429164-006
xxix
Changes to the Original Inspect H01 Manual

Added the information that the BOTH option does not show TNS/E instructions
for an OCA process on a TNS/E system on page 6-97.

Updated the usage guideline of INFO OBJECTFILE on page 6-111 and INFO
SAVEFILE on page 6-120.

Added two examples to show the listing for an accelerated TNS program
running on a TNS/R and TNS/E system on page 6-140 and 6-141.

The SELECT DEBUGGER DEBUG on page 6-165 selects Native Inspect
instead of Debug on TNS/E systems.

Added a limitation that CODE or LIB cannot be used to specify a TNS/E native
object file on page 6-168.

Updated the usage consideration for Accelerated programs on TNS/R and
TNS/E systems on page 6-201.

Updated the usage consideration for TRACE on page 6-221.

Section 16 title has been changed from “Using Inspect With Accelerated
Programs” to Section 16, Using Inspect With Accelerated Programs on TNS/R
Systems. A new figure, Figure 16-1 on page 16-2 has been added to illustrate
acceleration by Axcel.

Added a new subsection Dynamic-Link Libraries (DLLs) on page 17-5.

Added a new section,Section 18, Using Inspect on a TNS/E System that describes
how to use Inspect to debug emulated TNS processes running on a TNS/E
system.

Added new error messages, 406 on page A-48, 450 on page A-49, and 1003 on
page A-49 through 1009 on page A-50.

Added a new error under DMON Errors in Appendix C on page C-6.