Inspect Manual

Inspect Manual—429164-006
15-1
15
Using Inspect on a TNS/R System

TNS/R Overview on page 15-2

Executing Non-Accelerated Programs on page 15-2

Executing Accelerated Programs on page 15-3

General TNS/R Debugging Considerations on page 15-5

Debugging Non-Accelerated Programs on page 15-5

Debugging Accelerated Programs on page 15-5

Debugging TNS/R Native Programs on page 15-7

Performance and Debugging of TNS/R Programs on page 15-7

Register Usage on page 15-7

Pipeline Instruction Processing on page 15-8

Optimizations With Loads on page 15-8

Optimizations With Branches on page 15-9

Debugging Programs at the TNS/R Machine Level on page 15-10

TNS/R Breakpoints on page 15-11

TNS/R Machine Registers on page 15-11

Machine Code Addresses on page 15-12

TNS/R Machine-Level Commands on page 15-13
If you want to use Inspect on a TNS/R system, you should read this section as an
introduction, in addition to one of the following sections, as appropriate for your
debugging target (TNS/R native code or TNS accelerated code):
Section 16, Using Inspect With Accelerated Programs on TNS/R Systems
Section 17, Using Inspect With TNS/R Native Programs