Inspect Manual

Using Inspect With TNS/R Native Programs
Inspect Manual—429164-006
17-10
INFO SIGNALS
Output
INFO SIGNALS
The accepted syntax of the INFO SIGNALS command has not changed. The
command will no longer be restricted to OSS processes, and the output will change to
accommodate a 128-bit signal mask. The signal mask will be separated into four 32-
bit numbers.
Output
The output template shows the information the INFO SIGNAL command displays
without the DETAIL clause. Information on each signal is split across two lines.
LIST PROGRAM
The accepted syntax of the LIST PROGRAM command has not changed, but the
information displayed will. The detailed output will include the filename of all libraries
used by this process.
Example
This example shows the previous output type.
Scope Name: name
Source File: file
Modification timestamp: timestamp
Compilation timestamp: timestamp
Language: lang
Type: CODE
Base: integer
Entry: integer
Length: integer words
[Optimization level: integer] *1
-ETEST-INFO SIGNAL SIGFPE
Signal
Handler Mask Flags
SIGFPE(8)
CRE_TRAP_HANDLER_ (0 0 0 0 ) 0
-PROGRAM-LIST PROGRAM 1, DETAIL
Name: a.out
Number: 1
General Information
CPU,PIN: 8,160
[ OSS PID: 13406 ]*1
GUARDIAN Version: D20
Instruction Set: TNS/R
Location: #main.#5
Processor: TNS/R (CLX)