Inspect Manual

Using Inspect With TNS/R Native Programs
Inspect Manual—429164-006
17-11
MODIFY SIGNALS
Fields labelled with a “*1” are listed only for OSS programs. Fields marked with a “*2”
are listed only for programs that use libraries. A program may use zero or more
libraries.
Usage Consideration
Location strings and program names that would extend beyond the last column are
broken at the last column and listed in the next line beginning at the starting column of
the Location field, or the Program Name field respectively.
MODIFY SIGNALS
The MODIFY SIGNALS command supports native NSK processes. Also, the action of
SIG_DEBUG will be added to specify that when a signal is delivered, the debugger is
to be invoked.
SELECT PROGRAM
The SELECT PROGRAM command allows multiple library files to be specified using
the SRL clause.
SOURCE ICODE
The SOURCE ICODE command displays native RISC instructions. Inspect displays a
minus ( “-”) character next to RISC instructions which are from previous source lines
and a plus (“+”) next to RISC instructions which are from subsequent lines. Lines
containing RISC instructions also contain the source file line number that the
instruction is for.
Program File: /usr/people/paul/bin/a.out
[ Libraries: /usr/lib/libc.a ]*2
[ /usr/lib/libil8n.c ]*2
State: HOLD
System: \CUBS (175)
Type: TNS/R
INSPECT Information
ABEND Breakpoint: NO
Code Breakpoints: 1
Data Breakpoints: 0
Source System: None
STOP Breakpoint: NO