Inspect Manual

Error and Warning Messages
Inspect Manual—429164-006
A-18
103
103
The MODIFY command with a WHOLE option may not be interactive. The
modification string must be included in the command.
104
The TCP process for the current PATHWAY requester program has stopped and its
backup has taken over. All breakpoints in the program have been lost and must be
reset.
105
The listed program is removed from the Inspect program list. If the program was the
only program being debugged, then the Inspect process will stop. A likely cause of this
error is that the DMON process has been stopped or the processor has halted. If the
processor has not halted, then the program being debugged may still be running.
106
The indicated digit is not valid in the current input base.
107
BREAK command parameters may not be repeated in the command. The command is
ignored.
108
A warning. The operation required a conversion from an integer to string.
Modify string must be provided
TCP backup takeover. All requestor breakpoints must be
reentered.
DMON communication lost. Program is deleted: program-file
Invalid numeric digit for current input base
Break parameter is repeated in command
Integer to string conversion required