Inspect Manual

Error and Warning Messages
Inspect Manual—429164-006
A-50
1007
1007
A command such as INFO SAVEFILE was entered, specifying a TNS/E object file. To
debug TNS/E native object files, use either Visual Inspect or Native Inspect.
1008
The BREAK command was specified with the BACKUP option to debug a backup
process. On TNS/E, the backup process is not owned by the debugger when the user
tries to set the backup breakpoint.
1009
A TNS process can be suspended at a TNS/E location if, for example, the process hits
a data breakpoint in TNS/E system library code. If you enter STEP OUT number, the
number is ignored and Inspect returns the process to the TNS call site.
1106
This error occurs when the ADD PROGRAM command is used to add a TNS/E 64-bit
snapshot to a debugging session in a TNS/E system. Inspect is used only to debug
TNS programs and both TNS and TNS/R snapshots on a TNS/E system.
1107
This error occurs when the ADD PROGRAM command is used to add a TNS/E 64-bit
process to an Inspect debugging session in a TNS/E system. Inspect is used only to
debug TNS programs and both TNS and TNS/R snapshots on a TNS/E system.
Inspect cannot read a TNS/E object file.
BACKUP option is not supported on TNS/E.
STEP OUT count is ignored when process is at a TNS/E address.
Incompatible snapshot file version. Native Inspect is
required.
Process name cpu,pin is a TNS/E 64-bit process. Native
Inspect is required.