Inspect Manual

Notes for System Operators
Inspect Manual—429164-006
C-3
IMON and DMON Errors
IMON and DMON Errors
Errors occurring during IMON startup are displayed on the home terminal. Internal
IMON and DMON errors that occur during operation are reported on the operator
console. Errors related to a user processes are sent to the process's home terminal.
DMON and IMON error messages are displayed in this format:
where message describes the particular error and nn identifies an individual DMON
process.
Errors Common to IMON and DMON
This message is reported when the IMON process or one of the DMON processes is
recovering from an internal error. It should be ignored, unless the users of Inspect are
experiencing problems; in this case, the error should be reported to your Tandem
representative.
IMON Errors
You omitted the NAME $IMON option from the RUN command.
IMON must be started by user id 255,255.
Process creation failed for the reason indicated by the error number. The program file
name is displayed. This message will appear on the user's terminal if a debug event
triggered an attempt by IMON to start an Inspect process, and PROCESS_CREATE_
was unable to comply. It will appear on the operator console if an IMON process
attempted to start the a DMON process and PROCESS_CREATE_ was unable to
comply.
*** IMON ERROR *** message
*** $DMnn ERROR *** message
Internal error at P=%nnnnnn.
IMON must be named $IMON
IMON must be started by the Super ID
PROCESS_CREATE_ error: nn error detail: nn
Filename: file
PROCESS_GETINFO_ error: nn error detail: nn
on cpu,pin