Inspect Manual

Notes for System Operators
Inspect Manual—429164-006
C-6
DMON Errors
stopping the process. This error is reported if the STOP operation fails). When this
event occurs, the process still exists.
This error is reported when DMON begins execution if its attempt to allocate an
extended data segment fails.
User tried to run DMON on a incompatible version of the operating system.
DMON reports this error when an error occurs during the communication to
SAFEGUARD ($ZSMP).
DMON reports this error when an SPI error occurs during the SAFEGUARD operations
on a save file being created.
IMON reports this error when you try to invoke Inspect to debug a TNS/E native
process. To transfer the process to Visual Inspect,:
1. Start the Visual Inspect client and connect to the NonStop system.
2. From the Visual Inspect client, select the Open Program command and specify the
process name or CPU, PIN.
At the Native Inspect prompt, enter the switch command.
ALLOCATESEGEMENT failed: Volume volume, Error error
Incompatible GUARDIAN version
SAFEGUARD error nnn on $ZSMP, save file might retain
SUPER.SUPER default protection.
SAFEGUARD error nnn (SPI) from $ZSMP, save file might retain
SUPER.SUPER default protection.
Process name CPU,PIN is a TNS/E process and requires the use
of Native Inspect or Visual Inspect. Inspect does not support
TNS/E native processes.