Inspect Reference Summary

High-Level Inspect Commands
Inspect Reference SUmmary
106101 Tandem Computers Incorporated 33
SET TRACE The SET TRACE command controls the dynamic trace facility of Inspect. When
dynamic tracing is activated, Inspect displays trace information concerning the current
program as it executes. SET TRACE enables you to activate this facility and control
the level of tracing.
SET TRACE trace-level [=] { ON | OFF }
trace-level : one of
ARGUMENT[S] SCOPE[S] STATEMENT[S]
SET SYSTYPE The SET SYSTYPE command allows you to change the current systype of Inspect.
SET SYSTYPE { GUARDIAN | OSS }
SHOW The SHOW command displays the status of one or all of the Inspect parameters
controlled by the SET command.
SHOW { ALL [ AS COMMAND[S] ] }
{ set-object }
set-object : one of
CHARACTER FORMAT [=] { ASCII | GRAPHICS | XASCII }
DEREFERENCE DEPTH integer
ECHO { ALL | ALIAS[ES] | HISTORY | KEYS }
LOCATION FORMAT [ level ]
PRIV MODE [=] ON | OFF
PROMPT
RADIX [ INPUT | OUTPUT ] [ level ]
SOURCE { ALL | BACK | FOR | RANGE | WRAP }
STATUS { ALL | ACTION | LINE25 | SCROLL } [ level ]
SUBPROC SCOPING [=] [ SUBLOCAL | LOCAL ]
TRACE { ALL | ARGUMENT[S] | SCOPE[S] | STATEMENT[S] }
level : one of
BOTH HIGH LOW
SIGNALS The SIGNALS command displays information for the current program.
SIGNAL[S] [ * | signal-id [, signal-id ...] ]
[ [, ] DETAIL ]